|
 |
Products
|
|
OTHER PRODUCTS: HYDRAULIC FILTRATION | Top Ported | Base Ported | Manifold Cartridge | Medium Pressure Filters | Sandwich | Manifold Mounted | Suction Filters | Base Ported Medium Pressure | Tank-Mounted Filters | Spin-On Filters | Return Line Filters
|
|
|
Reservoir Accessories
|
|
|
|
When the contamination levels of system fluid are unacceptably high, in-line filters may provide only part of the solution. The addition of air breathers, suction strainers, and/or magnetic separators can help control the introduction of harmful contaminants in the system fluid. An air breather will effectively reduce the ingestion of airborn dirt particles when the fluid level drops within a reservoir. The amount of debris introduced during the fluid replenishment process can be minimized with the use of a filler strainer.
|
|
|
Air Breather Check (ABC)
The Air Breather Check (ABC) takes the guesswork out of when to change your air breather because it does not care how dirty the air breather looks or how long it's been installed. It only cares how well the breather is working. The ABC is calibrated in inches of water and will activate, providing a visual indication, when a vaccum equivalent of 15 inches of water (3.75 kPa) is reached. The ABC can be reset simply by depressing the yellow button and used over and over again.
Download:
 ABC Catalog Page
|
|
|
Air Breathers
Schroeder ABF and MBF style air breathers feature large pleated surface areas which remove airborne particles as small as three microns with exceptional dirt holding capacity. Higher dirt holding capacities extend the life of the air breather and thus the length of time between servicing.
Download:
Air Breathers Catalog Page
|
|
|
Desiccant Air Breather (D-AB)
The Schroeder desiccant air breathers are designed to increase operational efficiency while reducing operating costs by protecting industrial systems from moisture and particle contaminants.
Download:
D-AB Catalog Page
|
|
|
Magnetic Suction Separators (SKB)
With the use of Schroeder's Magnetic Suction Separators, suction line filtration is provided without starving the pump. They offer unique protection for pumps from all sizes of ferrous particles, some of which have the potential of destroying a pump in a single pass. Large ceramic magnets are spaced along the length of the separator. All hydraulic fluid entering the pump must move at low velocity through a powerful magnetic field. This field traps large quantities of micronic ferrous particles.
Download:
SKB Catalog Page
|
|
|
PAF1
20 gpm (75 L/min) | 100 psi (7 bar)
- Spin-On with full ported die cast aluminum head for minimal pressure drop
- Offered in pipe and SAE straight thread porting
- Spin-On thread = 1.00-12UNF-2B
- Visual gauge or electrical switch dirt alarms
- Small profile for use in limited space
- Same day shipment model available
Download:
PAF1 Catalog Page
PAF1 Parts List Drawing
|
|
|
Suction Strainer
These all metal suction strainers are furnished with optimized pleat size and screen area for extended life and low pressure droop. 100 mesh stainless steel screen (140 micron) has 33.3% open area. Porting head is carbon steel, center core is plated perforated steel. End cap is heavy gauge zinc plated steel.
|
|
Back to Hydraulic Filtration
|
|