Accumulators – SAF8
SAFETY AND SHUT-OFF BLOCK
PRODUCT RANGE EXPANSION – SAF8
HYDAC has now expanded its Safety & Shut-Off Blocks (SAF series) to include a high-pressure version. The SAF8 can be used up to 800 bar. See more information below.
This product will be displayed at the AOG 2015 from 11 to 13 of March 2015 at Perth Convention and Exhibition Centre. Our stand number is K14. We look forward to seeing you there!
The HYDAC Safety and Shutt-Off Block is an accessory for shutting off, protecting and discharging hydraulic accumulators.
The standard models are SAF10, SAF20, SAF30. The range haS been expanded to include an SAF32-3 and SAF50 block.
They can be supplied with or without additional equipment (e.g. inductive proximity switches, mechanical limit switches,…) and can be used for pressures up to a maximum of 400 BAR.
HYDAC has now expanded its SAF series to include a high-pressure version: The SAF8 can be used up to 800 BAR.
So HYDAC not only has a compact solution in the standard range, but also in the high-pressure range, providing a means of:
- protection on the fluid side,
- discharge to tank and,
- convenient shut-off of the accumulator from the system.
SAF10…50 for standard applications
Technical specifications SAF8:
- Material: Stainless steel 1.4313
- Pressure relief valve: up to 800 BAR
- Nominal size: 8 mm
SAF8 for high-pressure applications
- Autoclave connection
- Needle valve
- Pressure equipment directive
- Pressure relief valve to ATEX (94/9/EC)
If you have any question, call us on 1300 449 322.