Enquire Now
Slide Form

Build a smart system with HYDAC Industrie 4.0 smart sensors

At HYDAC, all our 4.0 ready hydraulic systems are fitted with our latest sensor technology. This technology is in-line with Industrie 4.0 and create smart machines that are able to self-monitor, self-learn and self-correct.

To build a smart system using HYDAC’s first level package “Industry 4.0 for Oil Condition Monitoring”, you will require the following smart sensors:

  • A Contamination Sensor (CS1000). It counts the number of particles in the oil and displays the results according to the ISO class.
  • An HYDAC Lab (HLB). It continuously monitors the condition of the oil by measuring the temperature, water saturation, conductivity and change in dielectric constant. This value indicates changes in viscosity, mix or dilution and it may also be an indication of oil deterioration.

To log the data collected by the sensors, we use the HYDAC Condition Sensor Interface (CSI-C11). The CSI module has 2 input channels for the HYDAC smart sensors.

HYDAC smart sensors have an HSI interface built in, this means “no configuration” is necessary! The CSI instantly recognises the sensors and configures the display appropriately, a real plug and play feature.

The CSI has also an output port for data transmission via a LAN cable. Moreover, it has an antenna that allows for wireless transmission via W-LAN. With the CSI you can access the data recorded on the system wirelessly using the HYDAC FluMoS mobile app.

The FluMoS Mobile app is available as a free download from Google Play Store.

How to install our Condition Monitoring System

AUSTRALIA 1300 449 322

AU au-flag NZ nz-flag