Enquire Now
Slide Form

Complete Cooling System with Cold Plates

HYDAC / COOLTECH offers high-performance and reliable liquid cooling.

Our engineering team can develop a simple sub-assembly for OEMs to a complete PLC controlled cooling solutions. Our cooling units are in accordance with CE and, upon request, can be UL certified. Our products consist of three different families of cooling units.

ALS – Air to liquid cooling units – up to 100 kW

These units uses ambient air to cool down the liquid to be used for the process. Every unit consists of the following main components:

  • Air to liquid heat exchanger made of aluminum, copper or Stainless steel, according to coolant compatibility.
  • Fans: to blow air throw the heat exchanger.
  • Reservoir, pressurized or pressure less according to design requirements.
  • Pump available in many variants like Positive displacement (PD), centrifugal (CF), gear (GP) or turbine (TP).
  • Control unit : from a simple connector to be connected to a main control unit to a complete PLC based solution connected via a communication line (Ethernet, RS485, Modbus etc…)
  • ALS units can be made with different sensors and power supply options.

 

LLS – Liquid to liquid cooling units – up to 300 kW

These units uses factory water to cool down the liquid to be used for the process. Every unit consists of the following main components:

  • Liquid to liquid heat exchanger made of Stainless steel, according to coolant compatibility.
  • Mixing valve : to regulate the temperature of the secondary water using a non-stable primary water temperature source.
  • Reservoir, pressurized or pressure less according to design requirements.
  • Pump available in many variants like Positive displacement (PD), centrifugal (CF), gear (GP) or turbine (TP).
  • Control unit : from a simple connector to be connected to a main control unit to a complete PLC based solution connected via a communication line (Ethernet, RS485, Modbus etc…)
  • LLS units can be made with different sensors and power supply options.

 

CCS – Compressor based cooling units – up to 30 kW

These units are normally known as “Chillers” and they use a refrigerant circuit with FREON gases to cool down the liquid below ambient temperature. Every unit consists of the following main components:

  • Refrigeration unit, with R134a or R410a refrigerants. The refrigeration unit can use an AIR COOLED condenser or a LIQUID COOLED condenser according to customer’s needs.
  • Reservoir, pressurized or pressure less according to design requirements.
  • Pump available in many variants like Positive displacement (PD), centrifugal (CF), gear (GP) or turbine (TP).
  • Control unit : from a simple connector to be connected to a main control unit to a complete PLC based solution connected via a communication line (Ethernet, RS485, Modbus etc…)
  • CCS units can be made with different sensors and power supply options.

COOLTECH is focused on high tech chillers where reliability and efficiency are the key factors.

 

Contact us for more information on this product

HYDAC Australia

HYDAC New Zealand

AUSTRALIA 1300 449 322

AU au-flag NZ nz-flag