Enquire Now
Slide Form

HYDAC High Pressure Power Unit HP

HYDAC High Pressure Power Unit HP

HYDAC High-Pressure Power Unit HP has an operating pressure up to 500 bar and flow rate up to 5.25 l/min. It presents very low noise emissions due to noise-reducing cast housing.

Features:

  • A high specific performance with simultaneously compact construction
  • A simple electrical installation by means of terminal boxes in the upper part of the power unit
  • Also, a radial piston pump with an oil-immersed motor in a stable housing
  • The versatile controls are available

 

Characteristics:

  • Flow rate: 0.3 to 5.25 l/min
  • Operating pressure: max. 500 bar
  • Switch-on time: S2 (short-term operation) S3 (intermittent duty)
  • Motor: Pn = 1.2 KW … 2.2 KW
  • Voltages: 3 Ph. 230/400V -50 Hz (others upon request)
  • IP rating: DIN EN 60034-5 min IP54
  • Pump parameters Vg.: 0.3 cm³/rev. … 5.25 cm³/rev
  • Tank volume: 1.1 – 7.0 l
  • Discharge volume: 0.7 – 5.8 l
  • Operating fluid: hydraulic oil according to DIN 51524 part 1 and 2
  • Viscosity range: 10 – 380 mm²/s is recommended
  • Filtering: Maximum permissible degree of contamination of the operating fluid in accordance with ISO 4406 Class 21/19/16
  • Cooling: Convection cooling / air cooling
  • Weight: from 7.2 to 25.7 kg
  • Return quantity: up to max. 10 l/min
  • Installation position: vertical
  • Operating fluid temperature: -20°C to max. +80°C
  • And ambient temperature range: -20°C to max. +40°C
Contact us for more information on this product

HYDAC Australia

HYDAC New Zealand

AUSTRALIA 1300 449 322

AU au-flag NZ nz-flag