Fluid Aqua Mobil - FAM 10


The FluidAqua Mobil units in the series FAM 10 operate according to the principle of vacuum dewatering. Therefore, they separate free and dissolved water and gases from hydraulic and lubrication fluids.

By using HYDAC offline filter element technology with its high contamination retention capacity and separation capacity, the unit is extremely economical.

What's more, all units have an AquaSensor AS1000 for continuous monitoring of the water content and for controlling the unit. It is also possible to supply a particle sensor CS1000 as an option for simultaneous monitoring of solid particle contamination.

Furthermore, it also provides an integrated heater to increase the dewatering capacity, for high viscosity fluids or for low fluid temperatures.

The Siemens S7 series of programmable logic control (PLC) in combination with a Siemens control panel in various languages guarantees simple and reliable operation.


  • Extremely low residual water levels, gas levels and particle contamination in the operating fluid ensure:
    • A longer oil changes intervals
    • An improvement in component service life
    • A greater machine availability
    • Also, a reduction in the LifeCycle Cost (LCC)


  • Viscosity range: 15 ... 800 mm²/s
  • Also, contamination retention capacity in accordance with ISO 4572: 200 g
  • Flow rate (at 50 Hz): ? 15 l/min


Fluid Aqua Mobil FAM 10

Please contact the store to confirm stock availability near you

Recommended Products