Describe the operation of the HYDAC CMU 1000 application program?

The CMU 1000 processes the application program stored in it continuously and cyclically like a PLC. The user creates this program using the CM Editor software tool for uploading to the device. The CM Editor is part of HYDAC’s PC software CMWIN and it provides the various tools and functions in accordance with IEC 61131 for designing, integrating, and testing the user program using drag-and-drop operations.

How are status indication, messages and values displayed on HYDAC’s CMU 1000?

HYDAC’s CMU 1000 features a backlit two-line LCD and three different coloured LEDs to display status indication, messages, and values. Data is input on-site using a built-in soft keypad, which also operates the device.

What connectivity features does HYDAC’s CMU 1000 have?

HYDAC’s CMU 1000 features eight input channels for HSI or smart sensors, eight input channels for analogue sensors, four input channels for digital signals, two analogue output channels and four relay switching outputs with changeover contacts.A USB slave port is provided for PC connection and a USB master port for storing measured data on a standard memory stick. Also included in the setup are an Ethernet interface and an RS232 port. It is possible to connect to higher-level control systems, monitoring systems and bus systems using built-in interfaces or in combination with an additional coupling module.

Condition Monitoring Unit - CMU 1000 Series

POA

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

The CMU1000 is an electronic evaluation unit for permanent online condition monitoring of machines and systems.

To do so, the device records and supplies relevant data, thanks to the sensors connected to it. We can, therefore, transfer the recorded data (processed or unprocessed) by the CMU 1000. This happens via different ports or as an analogue value to other devices and/or monitoring levels.

What's more, the CMU 1000 processes the application program stored in it continuously and cyclically, like a PLC. The user creates this program simply and conveniently on a PC using the CM Editor developed for this purpose. Then, the user uploads it to the CMU 1000.

This CM Editor is part of the HYDAC PC software CMWIN Version V03 or higher. Therefore, it provides the various tools and functions in accordance with IEC 61131 for designing, integrating and testing the user program using "drag and drop" operations.

Moreover, there is a back-lit LCD display and three different coloured LEDs for status indication and for displaying messages and values on the device itself. The operation of the CMU 1000 and data is input on site using a built-in keypad within the menu structure of the device.

Furthermore, the use of the CMU 1000 is for machines in both the stationary and mobile sectors. It is possible to connect easily to higher-level control, monitoring and bus systems using the built-in interfaces or in combination with an additional coupling module.

Features:

8 input channels for HSI or SMART sensors
8 input channels for analogue sensors
4 input channels for digital signals
2 output channels for analogue signals
4 relay switching outputs with change-over contacts
A USB slave port for PC connection
AUSB master port for storing measured data on a standard USB memory stick
An Ethernet interface
A RS 232 interface
2-line LCD display (2 x 16 characters) to display measured data and status and/or error messages
3 user-programmable LEDs in different colours, for status indication (red, yellow, green)
Also, the operation is simple by using navigation pad
Creation of customised application program using the PC software CMWIN supplied

Datasheet